Worksite Hazard Assessment

OSHA’s Personal Protective Equipment Standard requires employers to assess the workplace to determine if hazards are

present that necessitate the use of PPE. Based on the assessment, appropriate PPE must be selected and provided to

affected employees.

Using Subpart I Appendix B as a guide, develop a hazard assessment for your workplace or a workplace you are familiar

with. If you work in an office or other non-hazardous location, develop an assessment for an imagined industrial shop,

such as woodworking or metalworking. Use the other sections of Subpart I to help determine the appropriate PPE for

each hazard. You can also use online safety equipment catalogs to find examples of PPE that meets the OSHA

requirements.

Your submission must be a minimum of two pages, but no longer than four. References and citations in APA format

should be provided to support the hazard determinations and PPE selection.

Subpart I Appendix B is located at the following link:

http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10120